Features
Ultra-smooth, dual bearing stick assemblies
Refined 2048 resolution
AutoAssign - switch selection
One transmitter with programming and uncompromised control for all model types: planes, helis and sailplanes
Fastest-response processor, for an unprecedented connection with your model
All 11 channels function at identical speed and resolution
Backlit, high resolution, 4 gray-scale display for optimum clarity in all light conditions
Access all Function and System menus without turning the transmitter off
Easy access, back-mounted levers
RF status light; Blue - RF on, Red - RF off, Green - warning
SD card slot for expanded memory and future software updates
30-model memory expandable with SD Card slot
3+1 Digital/Analog Trims
Exclusive, proven JR rolling selector data input
Custom naming for flight modes
Overview
JR has broken the mould with this stunning new radio system. The sleek design is heavily influenced by Japanese 'Gundam' model robots.
The 11X Zero transmitter has eleven channels, a 30 model memory and a SD card slot. The usual three-model type selection is available for Helicopter, Airplane and Glider. It is compatible with all DSM2 receivers and will be supplied with a RD921 receiver as a combo. Each combo will include 1500 mAH Tx and Rx packs, a JR 2.4GHz module, a charger, a bind plug and a manual. With a JR 2.4 module fitted the transmitter has all normal DSM2 functions, including ServoSyncTM and Model MatchTM. The 11x Zero can also be used on 35MHz when fitted with a 35MHz module and a telescopic aerial.
When a SD card (not supplied) is fitted it can be used to store model set-up data and also to upgrade the 11X with data downloaded from a PC.
A three colour LED under the aerial declares the operating status of the transmitter. Green shows that the Tx is in stand-by mode. Blue indicates that RF is on, while Red shows that RF is off.
Programming will be familiar to current JR users using a combination of a rotary selector and four buttons alongside the back lit display. Modellers upgrading from a different manufacturer will find it a very easy radio to set-up.
BASIC FUNCTIONS
Servo reverse
Left & right trim
D/R & EXP : 2 : every F.M.
Sub trim
Advanced digital trim : every F.M.
Servo speed : 2
Program mix : 6 types(in 6 types, 3 types can be made curve mix.)
Trim step/trim type
Adjustable stick tension
DSC/Trainer jack
Model memory : 30
Model name : 10 letters
Flight mode name : 6 letters
Date erase
Fail safe
Alarm/timer : 3 types
Servo monitor with its test
Trainer system : upto 2 types
Type changeable : upto 3 types
Date copy (in TX)(TX<=>TX)(TX<=>SD)
device select(touch select) *you can also choose by switch
LCD with backlight(4-level)
Limit adjust
SD card slot
My list function
Simplified set-up function
Stick position switch
Mixing monitor
All servo hold
HELICOPTER FUNCTION
Flight mode : max. 6 types
Throttle curve : max 5 multi-point with EXP.
Pitch curve : max. 6 multi-point with EXP
Tail curve : 5 multi-point with EXP
Throttle hold : auto-cut
Gyro sensitivity set-up : max. 6/tail lock gain(max. 6 at G7000T) with gyro gain delay
Mix Throttle
Swash type : 6 (at 140 degrees)
Governor set-up : every F.M.
Flight mode delay
AIRPLANE FUNCTION
Flight mode : max. 3 types
Throttle curve : 2 multi-point with EXP
Pitch-curve : 2 multi-point with EXP
Tail curve : 5 multi-point with EXP
Throttle hold (at twin engine)
Gyro sensitivity se-up : max.3 with delay
AILE -> RUDD MIX
ELEV -> FLAP MIX
RUDD -> AILE/ELEV MIX
AILE -> FLAP MIX
Flap system (with direct input)
Snap roll : 4(individual)
Wing type set-up : with differential
Idle adjustment
GLIDER FUNCTION
Flight mode : max. 5
ELEV->CAMB MIX : every F.M
AILE -> RUDD MIX : every F.M. (with break function)
RUDD -> SPOI MIX : every F.M.
Flaperon MIX : every F.M./with Flap lever off-set
Flap rate : every F.M.
Flight mode delay
* Motor hold (with delay)
* Wing type
* Brake system
# every F.M. = every Flight Mode
Specs
